Plastic Wall Plug - white nylon (product illustration)

Plastic Wall Plug - yellow nylon (product illustration)

Fasteners

Plastic Wall Plug

Anchors

Used with a compatible screw to secure fixtures in a suitable wall substrate; plug design, screw size and fixing requirements must be confirmed.

Size / Spec

M5-M14 3/16"-1/2"

Material

PE / PP / Nylon

Standard

GB / DIN / Customized

Surface / Finish

Plain

Send Inquiry

Product Details

Plastic Wall Plug is used with a compatible screw to secure fixtures in a suitable wall substrate; plug design, screw size and fixing requirements must be confirmed. The current supply reference is GB / DIN / Customized, with PE / PP / Nylon, Plain, and M5-M14 3/16"-1/2".

Final dimensions, tolerances, grade or class, coating system, matched components, inspection documents and packing must be confirmed against the purchase order, approved drawing or project specification before production.

Selection & Use Steps

Identify the wall substrate and fixture requirements.
Select a plug design documented for that substrate.
Confirm plug diameter and length, hole dimensions, screw type and screw size.
Prepare the hole and install according to the selected plug instructions.

Technical Drawing

Specify plug outside diameter and length separately from screw diameter and length. Confirm hole diameter, hole depth, fixture thickness and any rim or anti-rotation feature.

Application Environment

Suitability depends on substrate, plug design, plastic material and service conditions. Confirm any outdoor, temperature or moisture requirements for the selected product.

Installation & Handling Precautions

Use the specified screw and hole dimensions; do not treat plug size as a metric screw thread.
Prepare and clean the hole as required by the selected product instructions.
Do not assume one plug design is suitable for solid, hollow and board substrates.
Confirm documented suitability before any overhead or safety-critical use.

RFQ Checklist

Wall substrate, fixture type and fixing requirements
Plug outside diameter and length
Screw type, diameter and length, and fixture thickness
Hole dimensions, plastic material and service environment
Quantity, destination, packing and any required product-specific test documents

Product reference gallery

Form and finish reference; final compliance follows order documents.

Ordering framework

Confirm the specification before quotation.

This product page identifies the available product family and basic supply range. Final compliance depends on the exact standard, grade, dimensions, finish, mating components, tests and documents stated on the purchase order or approved drawing.

01Standard and editionState the governing product standard, drawing or approved equivalent.

02Grade and classConfirm material grade, property class, condition and any supplementary requirement.

03Size and threadDiameter, pitch or TPI, thread series, fit or tolerance and handedness where applicable.

04Length and geometryOverall or effective length, head or end style, thread length and drawing dimensions.

05Finish and assemblyCoating standard, thickness or color, lubrication and mating-part compatibility.

06Quantity and evidenceLot quantity, packing, marking, MTC, inspection scope and destination requirements.

Request this product with a complete specification.

Product · standard · grade · dimensions · finish · quantity · documents · destination

Attach drawings or a size list in your email or WhatsApp conversation. State any required tests or documents for confirmation.

WhatsApp RFQ Email RFQ